Feature Article /
Jan 11, 2016

Should You Choose Fiberglass, Cellulose, or Foam Insulation?

Knauf Fiberglass Install copy
Three insulation options dominate home construction, but picking the right one can be tricky

Few construction topics bore homebuyers more than insulation. You, of course, know better. You’re well aware that heating and cooling account for roughly half of the energy used in the average home. And you also know that good insulation helps homeowners save money and makes houses more comfortable.

Fiberglass, cellulose, and foam dominate the conversation, but the breadth of insulation products is wide, including cotton, straw, hemp, and sheep’s wool, just to name a few.

 

Affordable Fiberglass

Traditionally, the over­whelm­ing choice for production home builders has been batt insulation, which usually means fiberglass but also includes mineral wool.

“Fiberglass and mineral wool batt insulation products are the most versatile on the market,” says Stacy Fitzgerald-Redd, director of communications for the Alexandria, Va.-based North American Insulation Manu­fac­tur­ers Association. “There is a wide range of products and performance levels, allowing builders to achieve optimal R-value within any budget,” she says.

Widely used, fiberglass batts come in various widths for different applications. According to the U.S. Department of Energy (DOE), fiberglass has an R-value between 2.9 and 3.8 per inch of thickness. Manufacturers also produce medium- and high-density fiberglass batt insulation with slightly higher R-values than the standard products—between 3.7 and 4.3 per inch. The denser products are intended for insulating areas with limited cavity space, such as cathedral ceilings.

Batts are inexpensive and straightforward to install, but they’re also easy to mess up. In order to receive a Grade 1 installation from an energy rater, batts must have six-point contact with the stud cavity, the sheathing, and drywall. They have to be cut around electrical junction boxes and split around wires and pipes.

Failing to fill the wall cavities and compressing the batts are two of the most prevalent installation mistakes. They’re also the leading causes of poor performance, which is why some green building consultants, architects, and builders recommend other products. Their answer for total fill: cellulose.

 

Total-Fill Cellulose 

Made largely from recycled newsprint with borate for fire- and insect-resistance, cellulose has become popular because of its eco-friendliness and its total-fill installation method. With an R-value of 3.6 to 3.8 per inch, it packs tightly into building cavities, inhibiting airflow.

Trisha Henderson, mar­­ket­ing communications specialist at Jenison, Mo.-based cellulose manufacturer Nu-Wool, says that the product’s performance characteristics and easy installation make it a good option.

“Compared to fiberglass, cellulose has a much higher installed density, resulting in a superior R-value, re­duced air infiltration, and superb acous­tical properties,” Henderson says. “Installing Nu-Wool premium cellulose insulation using the WallSeal System eliminates voids and air pockets common with other insulation materials, reducing air infiltration.”

Cellulose is available as a loose-fill product that’s sprayed into attics or dense-packed for wall cavities. The DOE says the product typically requires no moisture barrier and, when installed at proper densities, will not settle in a building cavity.

“When using the right product with proper techniques and equipment, blown-in cellulose allows for a complete fill of wall cavities, sealing around any wires, electrical boxes, or pipes, along with completely filling attic spaces,” Hen­derson says. Moreover, cellulose batts, she adds, are commonly used to in­sulate hard-to-reach areas that can’t be accessed with a blown-in cellulose product.

 

High-Performance Foam 

Though dense-pack cel­lu­lose and fiberglass batts offer decent R-values, they pale in comparison to liquid foam. Foam is sprayed into wall cavities and expands to fill cracks and crevices, creating a tight seal that minimizes air leakage. This high-per­formance product is popular with custom builders.

“Other products are insulation only, but spray-foam insulation is air-impermeable, which allows it to be an air barrier as well as insulation,” says Paul Duffy, vice president of engineering at foam manufacturer Icynene, in Mississauga, Ontario. “Typically, what happens with insulation products is that if there’s no air barrier, the thermal performance varies. That could have several consequences—increased heat flow and air leakage that can carry moisture into unwanted places, leading to mold.”

There are two main types of spray foam: open cell and closed cell, each with different characteristics. Open-cell foam is soft and spongy, impermeable to air but permeable to moisture, and according to the DOE, has an R-value per inch ranging from R-3.6 to R-4.3. Once applied, closed-cell foams become rigid and have an R-value range from R-6 to R-7.

Available spray-foam types include cementitious, phenolic, polyisocyanurate (polyiso), and polyurethane.

 

Assessing Thermal Performance 

Despite claims that certain types of insulation perform better than others, an ongoing study by Building Science Corp. (BSC), in Westford, Mass., suggests that all insulation delivers the same performance under similar conditions and with proper installation.

As part of the Thermal Metric Project—a multiyear collaborative research effort between BSC and a group of industry partners—test walls (using either 2x4 or 2x6 framing) were built, with five stud cavity insulations and one exterior insulation application. The long-term goal of the research, BSC says, is to develop a better way to assess the thermal performance of building enclosures—one that accounts for known physical heat-flow mechanisms and operating conditions.

A recent BSC research update concludes that when walls are constructed with the same installed R-value in the stud space and are air-sealed inside and out, they all display essentially the same thermal performance regardless of insulation type. It also adds that all of the tested wall assemblies were subject to thermal bridging, regardless of the insulation used.

 

Builders Weigh In 

Nevertheless, builders have their favorite insulation type for a variety of reasons. For most production builders, foam is out of the question. For example, Reality Homes, an on-your-lot Pacific Northwest builder, favors fiberglass because it offers a better balance of cost and performance.

Reality Homes has explored other options, such as blown-in fiberglass, but has ruled them out. “Our standard insulation is fiberglass batt,” says Lowell K. Hankel, vice president of Reality Homes. “We don’t do foam in the perimeter walls. Of the nearly 5,000 houses we’ve built, we may have had two people who wanted foam.”

Reality Homes’ general manager, Patrick Eppright, is a fan of foam, but he still thinks fiberglass is a good product. “There are better products than fiberglass batt insulation,” he says, “but we don’t think it’s an inferior product at all.”

Ann V. Edminster, net-zero energy design consultant, says cost is the reason that use of fiberglass batts is so widespread in home building. “It’s cheap,” says Edminster, founder and managing principal of DesignAvenues. “Builders have been shielded from the hidden costs, which are generally borne by the homeowners in terms of thermal performance deficits, comfort issues, and moisture/durability risks.”

“It’s extremely hard to do a good job insulating with fiberglass batts, and few installers—at least here in California—are trained or expected to meet quality installation standards, even when the certification programs call for them,” she continues. “Sad to say, speed rules; the faster the insulation goes in, the happier the insulation firms are. And, of course, speed is generally the enemy of quality.”

Alan Gibson, partner and co-founder of the Belfast, Maine, design/build firm GO Logic Homes, also isn’t a fan of batts. “If you look at just the R-value in an airtight cavity, [batts] will give you that R-value, but if there is no attention paid to air sealing the shell, then it’s pretty much an air filter that performs poorly in a cavity with some air movement in it.”

Gibson says that builders and architects should choose insulation based on its general effectiveness per inch, environmental impact, and cost. So which insulation does GO Logic use? “Our walls are typically 2x6 and insulated with blown-in cellulose,” he says. “It’s a great choice for high-performance buildings because, in a dense-pack application, it helps with air sealing, although it’s not considered an air-sealing material. It’s very dense, so less air can move through it [than with] fiberglass batt insulation.”

Cellulose, Gibson explains, is inexpensive and is not energy-intensive to produce. His second option is blown-in fiberglass because it has a higher R-value (about 4.2) per inch. “But fiberglass is not recycled and has a higher embodied energy, so those are reasons not to use it,” he adds.

Another product that Gibson eschews is spray-foam insulation. It’s not only a petroleum-based product, he explains, but it also requires the use of blowing agents. “Foam does save money and does lower your energy bill,” he says, “but if the goal is to reduce the impact of climate change, it’s not helping at all.”

Noted green builder and blogger Matt Risinger doesn’t agree. Open-cell is the default choice for his new homes or whole-house renovations, if the budget permits. “I’m a big fan of foam for this climate zone,” says Risinger, principal of Risinger Homes, in Austin, Texas. “It works really well, it’s got some air-sealing abilities, and it’s a total-fill product.”

Risinger builds mostly unvented attics, so foam allows him to encapsulate the attic roof and put all the ductwork in the conditioned spaces of the house.

 

Cost Concerns 

Cost is the primary complaint that production builders have against foam, and its price difference is significant. Reality Homes says that foam would cost it about $4,000 to $5,000 more per house.

Risinger says the cost for a 2,000- square-foot house in foam versus fiberglass is about $3,000 to $4,000 more. If the budget is slim, he opts for blown-in fiberglass and dense-pack cellulose, but even then, he uses spray foam under the roofline.

Icynene’s Paul Duffy says that builders who balk at foam because of cost are evaluating the product incorrectly. “If you’re replacing R-value with R-value, it’s the most expensive product,” Duffy admits. “But if you’re looking to replace insulation, air barrier, water resistant barrier, and vapor barrier with one product, spray foam tends to be about 10 percent to 15 percent less expensive.”

This realization is one of the reasons why more production builders are adopting foam, Duffy says. While penetration in this market is low, large builders are committing to energy efficiency as part of their overall product offering, he points out.

“One of the leaders is Meritage Homes,” Duffy says. “They’ve basically adopted an all-spray-foam specification for their new homes in markets like Arizona, Texas, and the Carolinas.” Meritage has found that the product acts as air barrier and insulation, so there’s no need to vent attics, test ductwork, or air-seal attics. “They’ve been able to get incremental cost down in the range of $1,000 per home or less,” Duffy says. Toll Brothers also is experimenting with foam, he adds.

In the end, BSC’s research confirms what some experts have long said: that any insulation works well if properly installed and if the home is well-sealed. It may mean the house won’t be built and delivered as fast, but at least your buyers won’t be losing money out of a leaky, under-insulated home.

 

A version of this story ran in PRODUCTS’s sister publication, Professional Builder.

 

See more building envelope news from PRODUCTS magazine here:

Comments

The problem with allot of builders is they don't properly educate the consumer on the benefits of foam. If they would properly educate consumers every person who is looking to purchase a new home would opt for foam.

Which of the three is lightest in weight? Or which would be the best to use ona tiny mobile house?

I've learned a lot reading this post. http://www.brvfinsulation.com/

When do they ever FILL the cavity when spraying foam ?? I have yet to see a COMPLETE JOB...

Add new comment

Nigel F. Maynard

Nigel F. Maynard is the Editor of PRODUCTS. 

@ @